A childcare provider recently asked us an important question:
“We are looking for wearable devices children in our drop in care would wear and then alarm if they exit the room while still wearing the band. Does your product do that?”
Yes. This is exactly the type of situation Indoor5.0 is designed to support.
Each child wears a secure wristband. Discreet devices monitor selected exit areas. When the system detects a child’s wristband near a monitored exit, an alarm sounds on the device at the door. Connected computers and tablets also alert the relevant staff members.
The door remains unlocked. Nothing blocks the child or prevents staff from opening it. The purpose of the system is to make sure that a child approaching an exit does not go unnoticed.
A door alarm that knows when a child wearing a wristband is nearby
A standard door alarm can tell you that a door has opened. It cannot necessarily tell you whether the person at the door is a child in your care, an employee, a parent, or another visitor.
Indoor5.0 takes a different approach.
The exit device detects Indoor5.0 wristbands within the configured exit area. It is not a general motion detector that responds to every person or object passing the door.
When a registered wristband enters the monitored area, the system produces an immediate audible alert at the exit. At the same time, the Indoor5.0 software on connected computers and tablets sounds an alarm and displays a notification for relevant staff.
This gives employees two clear signals. The sound at the door draws immediate attention to the location, while the staff notification helps the right people respond.
Secure bracelets that children cannot remove by themselves
Another customer explained their requirements in words that will be familiar to many childcare operators:
“We need bracelets that a child cannot take off alone, sensors at every exit including emergency exits, and a loud alert to staff when a child goes near an exit. The system must not lock any exit.”
These requirements describe the difference between an ordinary wearable and a child safety wristband designed for supervised care.
Indoor5.0 wristbands use a magnetic locking closure. A child cannot open the bracelet alone. Authorized staff members use a dedicated removal tool when the wristband needs to be taken off.
This helps keep the wristband securely on the child throughout the care session. The exit alert therefore does not depend on a loose band or a bracelet that a child can easily remove and leave inside the room.
The wristbands are also waterproof and designed for children’s daily activities.
Monitoring every exit, including emergency exits
Children may approach a door that staff did not expect them to use. A complete exit monitoring plan should therefore consider every relevant exit, including emergency exits.
Indoor5.0 devices can be installed at designated exit doors according to the layout of the facility. The devices are placed on the ceiling or wall, similar in appearance to discreet access points. Most people will not notice them during normal daily activity.
Each monitored exit can provide a local audible alert when a wristband is detected in its alert area. Staff can also receive notifications through the relevant computers and tablets.
The number of devices required depends on the number of exits and the layout of the building. This is confirmed during the project review.
The system never locks or blocks an exit
This point is essential.
Indoor5.0 does not lock doors. It does not install a barrier. It does not prevent an emergency exit from opening. It does not physically stop a child, employee, parent, or visitor from using the door.
The system provides detection and notification. The door continues to operate normally.
This makes Indoor5.0 suitable for facilities that want an additional child safety layer without interfering with normal door operation or emergency evacuation.
What happens when a child approaches an exit?
First, the child enters the monitored area while wearing the wristband.
Next, the exit device detects the wristband and sounds an alarm.
At the same time, connected computers and tablets running the software alert the relevant staff members.
Staff can then check the exit and respond according to their facility’s procedures.
The audible warning at the door can also draw the child’s attention, while staff receive the notification they need to take action.
Designed for drop in care and multiple locations
Drop in childcare centers often have children arriving and leaving throughout the day. Staff may be supervising activities, speaking with parents, and managing check in procedures at the same time.
An automatic exit alert can support staff during these busy periods without adding another manual door monitoring task.
Indoor5.0 can also be planned for organizations operating several locations. For example, a project may involve approximately 250 wristbands across five locations, with around 50 children at each site.
Each location can be equipped according to its child capacity, exit layout, staff workflow, and notification requirements. The final configuration is based on the actual facility rather than a fixed package that may not fit every building.
How much does a child exit alarm system cost?
For exit door alarm projects, the basic Indoor5.0 software license is billed yearly.
The annual license fee typically ranges from $1,500 to $2,500, depending on the project size and scope. The basic license is structured as a yearly fee rather than a monthly subscription.
For a project requiring approximately 250 wristbands across five locations, the complete quotation depends on factors such as the number of monitored exits, the required devices, installation needs, and the support scope.
After reviewing the locations and exits, Indoor5.0 can provide a proposal that clearly identifies the one time project items and recurring license costs.
Why not simply use a standard daycare door alarm?
A conventional door alarm may be suitable for detecting that a door has opened. However, childcare operators often need more specific information.
They need to know when a child wearing a wristband is near an exit.
They need an alert at the door and on staff devices.
They need bracelets that children cannot remove alone.
They need coverage for normal exits and emergency exits.
They also need all of this without locking or blocking the door.
Indoor5.0 brings these requirements together in one child exit monitoring system.
A safety layer that supports staff
No technology replaces attentive employees, clear supervision procedures, secure premises, and regular safety checks.
Indoor5.0 adds another layer to a people first safety strategy. It helps staff receive a prompt warning when a child wearing a wristband approaches a monitored exit, giving them an opportunity to respond quickly.
Frequently asked questions
Does the wristband trigger an alarm if a child exits the room?
When the wristband is detected within a configured exit area, the device sounds an alarm at the door. Connected staff computers and tablets also produce audible and visual notifications.
Can a child take the bracelet off alone?
No. The wristband uses a magnetic locking closure. Authorized staff remove it with a dedicated tool.
Does Indoor5.0 lock the exit door?
No. The system does not lock, block, or physically control the door. Every exit continues to operate normally.
Can emergency exits be monitored?
Yes. Designated emergency exits can be included in the project without interfering with their normal operation.
Does the device alarm whenever anyone walks past?
The system is designed to detect Indoor5.0 wristbands rather than general movement. It does not operate as a conventional motion detector.
Is there a monthly license fee?
The basic exit alarm license is billed yearly. The typical annual range is $1,500 to $2,500, depending on the project. The complete quotation is based on the required wristbands, exits, devices, installation, and support.
Can the system support approximately 250 wristbands across five locations?
Yes. A project can be planned for this capacity. The exact configuration is prepared after reviewing the number of exits and the requirements at each location.
Looking for a child exit alarm for your daycare?
If you operate a daycare, drop in childcare center, YMCA, after school program, church nursery, or indoor play center, Indoor5.0 can help you create an exit alert system around your actual facility.
Tell us how many children you supervise, how many locations you operate, and how many exits you need to monitor. We will help you plan the wristbands, exit devices, staff notifications, and annual license for your project.
Request a demo at indoor50kids.com